Descargar Imprimir esta página

Oster XPERT Serie Manual De Instrucciones página 29

Ocultar thumbs Ver también para XPERT Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

BLEND-N-GO
1.
Cup Lid
2.
Break Resistant, BPA-Free Tritan™ Plastic
Cup
3.
Locking Sealing Ring
4.
6-Point Blade
WARNING: The blade is very sharp,
handle carefully.
5.
Threaded Cup Bottom
6.
Motor Base
USING YOUR BLEND-N-GO
ACCESSORY WITH YOUR BLENDER
WITH ACTIVESENSE™ TECHNOLOGY
Before you use the product for the first time,
separate all parts and clean them. Refer to Page
16 for cleaning instructions - the cup, lid and blade
assembly are all top rack dishwasher safe.
Never blend hot liquids in the Blend-N-Go
cup accessory.
1.
Place the blade in the threaded cup bottom.
2.
Place the sealing ring over the blade
assembly. Carefully press and tuck the sealing
ring into the last groove of the threaded
cup bottom. Refer to page 7 for detailed
instructions on blade assembly.
3.
Place all ingredients into the cup, then screw
the integrated blade assembly clockwise
onto the cup. Be sure the integrated blade
assembly is tightened to the cup before using.
4.
To put the cup assembly on the motor base, push down and turn counter-clockwise.
The cup assembly should be fully seated into the 4 grooves of the motor base.
5.
Refer to page 7-8 on how to use the food mode settings and manual controls. Press
the start/pause button (
NOTE: The food mode "Salsa" (
accessory.
6.
Press the start/pause button (
to turn the blender off. Remove the cup assembly from the motor base by
(
)
pushing down and turning clockwise. This appliance is pre-programmed to turn off
BLSTTDT Series_BLSTTDG Series_18SEPM1.indd 10
CUP ACCESSORY (WITH SELECT MODELS)
®
1
CUP
®
) to begin blending.
) to stop blending and the power button
®
) is not available with the Blend-N-Go
E n gl i sh -10
2
3
4
5
6
MANUAL
BLEND-N-GO
MANUAL
BLEND-N-GO
SPEED
MEDIUM
SPEED
MEDIUM
PRESS
PRESS
TO START
TO START
cup
®
MANUAL
VASO BLEND-N-GO
VELOCIDAD
MEDIA
OPRIMA
PARA EMPEZAR
1/17/19 08:52

Publicidad

loading