How To Disassemble - Oster XPERT Serie Manual De Instrucciones

13. Press the power button
( ) will blink, indicating the product is active and ready to use. The light will stay
on when the motor is running.
14. Press a manual control button - medium or high is recommended for slicing/
shredding.
15. When ready to begin, press the start/pause button (
pusher with one hand and the feed tube with the other, push gently down on the
food pusher while the manual control is running. Always use the food pusher to yield
more evenly sliced or shredded foods. NEVER USE YOUR FINGERS.
16. Press the start/pause button (
button
(
automatically if not used for a period of several minutes. All lights will turn off when
the unit automatically powers down.

HOW TO DISASSEMBLE

1. Turn the blender off and unplug the appliance from the outlet.
2. After the S blade or slicing/shredding disk has stopped spinning, remove the food
processor accessory from the motor base.
3. Turn the cover clockwise to remove it from the processor bowl and remove the S
blade or slicing/shredding disk carefully. Be careful not to let the S blade or slicing/
shredding disk fall out of the container. Scrape any remaining food from the blade
and processor bowl.
WARNING: The blade is very sharp, handle carefully.
4. Unlock the processor bowl from the adaptor by turning the processor bowl clockwise.
CLEANING
All parts of the food processor accessory are top rack dish-washer safe except for the
adaptor. Make sure to remove the adaptor from the processor bowl before cleaning.
All parts (except for the adaptor) can also be hand washed with warm, soapy water.
Rinse well and dry. It is recommended to hand wash the S blade and slicing/shredding
disk for longer usage.
BLSTTDT Series_BLSTTDG Series_18SEPM1.indd 13
to turn the blender on. The start/pause button
( )
) to stop slicing/shredding and press the power
to turn the blender off. This appliance is pre-programmed to turn off
)
). While holding the food
E n gl i sh -13
1/17/19 08:52