Publicidad
Idiomas disponibles
Idiomas disponibles
A
WARNING:
When servicing use only
identical Craftsman replacement pads, Use of any
other parts may create a hazard or cause product
damage,
GENERAL
Only the parts shown on parts list, page 25, are intended
to be repaired or replaced by the customer. All other parts
represent an important part of the double insulation system
and should be serviced only by a qualified Sears se_ce
technician.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
A
WARNING:
Do not at any time let brake
fluids, gasoline, petroleum-based products,
penetrating oils, etc. come in contact with plastic
pads. They contain chemicals that can damage,
weaken, or destroy plastic.
When electric tools are used on fiberglass boats, sports
cars, wallboard, spackling compounds, or plaster, it has
been found that they are subject to accelerated wear and
possible premature failure, as the fiberglass chips and
grindings are highly abrasive to bearings, brushes,
commutators, etc. Consequently it is not recommended
that this tool be used for extended work on any fiberglass
material, wallboard, spackling compounds, or plaster.
During any use on these materials, it is extremely
important that the tool is cleaned frequently by blowing
with an air jet.
A
WARNING:
Always wear safety goggles, or
safety glasses with side shields dudng power tool
operation or when blowing dust if operation isdusty,
also wear a dust mask.
LUBRICATION
All of the beadngs in this tool are lubricated with a suffi-
cient amount of high grade lubricant for the life of the unit
under normal operating conditions. Therefore, no further
lubrication is required.
Paae lg
Publicidad
