Publicidad
Idiomas disponibles
Idiomas disponibles
REAR VIEW OF ROUTER
DEPTH CONTROLKNOB
VARIABLE SPEED
CONTROL SELECTOR
POWER CORD
"LOCK-ON'
BUTTON
LOCK
HANDLE
"ON-OFF
TRIGGER
SWITCH HANDLE
SPEED
SELECTION CHART
5116-18 UNC-2B
ROUTER BASE
SUBBASE
COLLETNUT
FLANGE
PLUNGE
ACTUATOR
Fig. 2
ELECTRICAL
CONNECTION
Your router has a precision built electric motor. It should be connected to a power supply that Is 120 volts, 60 Hz, AC
only (normal household current).
Do not operate this tool on direct current (DC). A voltage drop of more than 10
percent will cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet,
double-check the power supply.
WARNING:
The operation of any power tool can result in foreign objects beingthrown
into your eyes,
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a full face shield when needed. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shields, available at Sears Retail Stores. Always wear eye protection which Is
marked to comply with ANSI Z87.1.
Page 7
Publicidad
