Crafstman ZTS 7500 Manual Del Operador página 11

Figure9.
install Lower Chute
A. Lower Chute
B. Mounting Plate
C. Locknuts, 5/16-18
D. Carriage Bolt, 5/16-18 x 5t'8
E. Lower Chute Rod
F. Rubber Strap
G. Discharge Deflector
H. Locknut
I. Mounting Hole
Lower Chute mnstaHation
1, install mounting pUate(A, Figure 9) to mower deck as
shown, Secure with 5/16-18 x 5/8 carriage bouts (C)
and 5/16-18 bcknuts (B),
2, Lift discharge deflector (F),
3, insert bwer chute rod (D) into mounting pUate(A),
4, Pull rubber strap (E) bebw discharge deflector, and
secure by pUacing hob (H) over bcknut (G),
////_
Figure 10. Connecting Tube Assembly to Lower
Chute and Cover
A. Upper Tube
B. Cover
C. Ridge, Upper Tube
D. Ridge Cutout
E. Lower Chute
F. Strap, Rubber
G. Pin
H. Tube Assembly
CONNECTING TUBE ASSEMBLY TO LOWER CHUTE AND
COVER
1, Slide the upper tube (A, Figure 10) into cover (B)
aligning ridge (C) with cutout (D) as shown,
2, Slide tube assembly(H) over lower chute (E), Secure
tube assembly (H) to lower chute (E) using strap (F)
and pin (G),
11