Crafstman ZTS 7500 Manual Del Operador página 6

NOTE: mnthis manual, 'left" and "right" are a_ways defined from
the standpoint of the operator position facing forward from seat.
WARNING
To avoid serious injury, engage parking brake,
disengage PTO, stop engine, remove key and
disconnect spark plug(s) before attempting to
install, remove or work on the mower.
COUNTERWEIGHT iNSTALLATiON
1, Slide pins (A, Figure 1) on counterweight (B) into
slots (C) on front footrest support bracket (D),
NOTE: Counterweight pin and safety dip are attached to
the counterweight from the factory. The pin and safety
clip must be removed from the counterweight to attach
the counterweight to the front footrest support brackeL
2, Secure counterweight (B) with pin (E) to front footrest
support (D),
3, Secure pin (E) with safety clip (F),
SAFETY RULES
1, Never operate mower on slopes greater than 10 °,
2, Front counter weight is required when ever using rear
mounted grass collection system,
Figure !. lnstalt Counter Weight
A. SJide Pins
B. Counter Weight
C. Pin SJots
D. Front Footrest Support
E. Pin
F. Safety Ctip