Crafstman ZTS 7500 Manual Del Operador página 9

Figure5.
install Collector Bags
A. Cover
B. Collector Bags
C. Grass Bag Hanger
D. Bag Hanger Post
iNSTALL COLLECTOR BAGS
1. Raise the cover (A, Figure 5).
2. Attach collector bags (B) using grass bag hanger (C)
to bag hanger post (D).
44" Mowers
50"
42" Mowers
\ -%
42" Mowers
44"/50" Mowers
Figure 6. Middle and Upper Tube Assembly
A. Upper Tube
B. Middle Tube
C. Screw, 1/4 x 3/4
CONNECTING UPPER AND M_DDLETUBE
NOTE: The Upper and Middle Tube are shipped
assembled for use on 50" mowers. If yeur model
differs from this configuration you wifl need to make
adjustments in the assembly.
1. SHde the upper tube (A, Figure 6) over middUe tube
(B) and secure together using screw (C).
Unupper tube:
: Third hoUefrom end is for 42" mowers
- Fourth hoUefrom end is for 50" mowers
- Fifth hoUefrom end is for 44" mowers,
See Figure 8 for hoUeUocations,
NOTE:
If you are installing a bagger on 44" or 50" mowers
continue with the installation on page 10.
If you are installing a bagger on a 42" mower continue
with the installation beginning on page 14.