KSIX BARCELONA Manual Del Usuario página 7

1. Power on button: Press this button
to turn the ceiling light on.
2. Power off button: Press this button
to turn the ceiling light off.
3. Night light mode: Press this button
to set the ceiling light on night light
mode.
4. Increase brightness: Press this
button to
brightness.
5. Decrease temperature: Press this
button to
temperature.
6. Switch temperature: Press this
button to switch temperatures.
7. Increase temperature: Press this button to increase the
light's temperature.
8. Decrease brightness: Press this button to decrease the
light's brightness.
Warnings
• Please, strictly follow this user manual to install and use the
product to avoid accidents.
• Do not disrupt the bulb or modify any component.
• Turn off the power and the main electrical panel before
installing or doing maintenance tasks to avoid damage from
electric shock.
• Do not install the lamp on unstable or unsafe ceilings.
• Do not cover the lamp with blankets or similar objects.
• Do not handle the bulb or any other lamp component for
installation, repairing or checking unless you are a qualified
electrician. Wire connecting must follow IEE electric
standard or any other valid national standard.
• Do not install the lamp above hot or wet surfaces.
Maintenance recommendations
• Regularly clean the product with a dry cloth. The product
must be disconnected or
switched on when you clean it.
• Keep the connectors and/or ports free from dust, lint, etc.
to prevent improper
connections.
• Avoid breaking the device. Do not put objects over it or
bend it too strong.
• If the product includes a cable do not bend it too strong
and do not pull from it to unplug
the product.
• Do not wet the product. Keep it always in a dry place, away
from humidity.
• When not using the product, store it in a place free from
dust, dirt, lint, liquids, etc.
• If water or other liquids enter the product interior, unplug
it immediately from any
attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be
damaged.
• Do not use the product for anything other than its intended
use.
• Please recycle the product in accordance with local
environmental laws and regulations.
Safety information
Please read the following instructions before using the
device for the first time:
• When you use device keep it away from heat sources (fire)
and from humidity sources
increase
decrease
the light's
the light's