Publicidad
Idiomas disponibles
Idiomas disponibles
Installing the roof rack basket
B
A
B
A
Preparation
Before installing the roof rack basket, first install the roof
bars as described in the Owner's Manual.
1. Unlock the side covers (A) of the roof bars using the
appropriate Allen key, and open them. Take out the rubber
strips (B) and cut them to a length of 530 mm.
Then re-insert the rubber strips centrally, at the same
distance from both sides of the roof bars. Close the side
covers and lock them with the Allen key.
B
2. Open the caps on the holders (1) of the roof rack basket
with the supplied Allen key, and remove them. To do this,
carefully pull the end of the cap where the lock is located
sideways (A). To detach the cap from the metal hook (C)
on the bracket, slide it away from the hook (B).
C
3. Carefully position the roof rack basket on the roof bars.
Important: Due to its size and weight, the roof rack basket
cannot be positioned on the vehicle by one person alone.
Have more than one person perform this step, to prevent
damage to the roof rack basket and/or the vehicle.
Make sure that the vehicle's paintwork is not damaged by
sharp objects (e.g. zips or rivets on clothing).
Publicidad
