Publicidad
Idiomas disponibles
Idiomas disponibles
10
Adjustment menu
O
Contrast
: Adjust the screen contrast to match the brightness level in the room.
Pressing the [2] key toggles between brightness and contrast.
Direct operation
Even if the menu screen does not appear, the contrast can be adjusted by pressing
the (4 or » key. If the & and MB keys are pressed at the same time, the
|
maximum leve! (100) will be set.
xt
Brightness
. Adjust the brightness to match the brightness level in the room so that the level
will be easy to see.
Pressing the [21 key toggles between contrast and brightness.
Note: If the & and >] keys are pressed at the same time on the Brightness
adjustment screen, the standard level (50) will be set.
Size € Pos. : Press the [2] key to select the zoom / horizontal position / horizontal size / vertical
position / vertical size adjustments.
A
Press the [11 key to save the adjustment.
ZOOM
: Both the horizontal and vertical size of the image can be adjusted at the same
time; however, the aspect ratio cannot be changed.
Press the [4 key to make the image smaller, the ® key to make it larger.
H. Position : The horizontal position of the image can be adjusted.
Press the :« key to move it to the left, the ® key to move it to the right.
[=]
H. Size : The horizontal size of the image can be adjusted.
Press the [4 key to make the image smaller, the ® key to make it larger.
Note: Setting the image in the center of the screen to start will make the
—
adjustment easier.
V. Position : The vertical position of the image can be adjusted.
Press the [4 key to make it downward, the *) key to move it upward.
[T]
V. Size : The vertical size of the image can be adjusted.
Press the [4 key to make the image smaller, the » key to make it larger.
Note: Setting the image in the center of the screen to start will make the
adjustment easier.
gg
Geometry : Press the [2 key to select the vertical pincushion / side pincushion balance /
trapezoid / parallelogram / Geometry 2 adjustments.
Press the [1] key to save the adjustment.
YT
V. Pincushion : the image can be adjusted for barrel distortion.
Press the [4 key to decrease the Pin / Barrel distortion of the image,
|
the à key to increase it.
CT
Side Pin. Bal. : The image can be adjusted for the side pincushion balance to the left
and right. Press the & key to expand to the left of the image, the #
|
key to expand it to the right.
A
Trapezoid
. The image can be adjusted for trapezoidal distortion.
Press the «A key to make the top edge narrower, the & key to make the
bottom edge narrower.
LT
Parallelog ram
: The image can be adjusted for parallelogram distortion.
Press the [4 key to collapse the parallelogram to the left, the » key
to collapse it to the right.
> b Geometry 2 : Press the #] key to change the sub OSD screen.
Press the [2] key to select the Top Corner / Bottom Corner / S-Curve 1 /
S-Curve 2 adjustments.
LI
Top Corner : The image can be adjusted for vertical pincushion distortion in the
top corner.
Ex
Bottom
Corner
: The image can be adjusted for vertical pincushion distortion in
the bottom corner.
S1
S-Curve
1 : The image can be adjusted for vertical pincushion distortion in the S-
Curve 1.
O e O
S2
S-Curve 2 : The image can be adjusted for vertical pincushion distortion in the S-
Curve 2.
O > UU
Publicidad
