Publicidad
Idiomas disponibles
Idiomas disponibles
Games Paddle Connection
Game Paddle 1
Other Control Devices
Note: Control devices other than the supplied Game Paddles will only work
with a game written to support them.
Analog - an analog joystick can be connected and used instead of or as well as
the games paddles supplied.
AUX - a light gun or other auxiliary control device can be connected and used
instead of or as well as the paddles or analog joystick.
Operation
Start
Plug into and switch on the Power Supply
Ifusing an Amstrad CM14 or MM12 - plug in and switch on the monitor.
Ifusing your television - plug in the AC adapter and switch on.
Load the cartridge into the Console
Do not use unnecessary force, check you are not trying to insert the
cartridge upside down.
Switch on the Console
Use the power/interlock switch. This switches the console on and locks
the cartridge into position. NEVER USE FORCE - SWITCH OFF THE
CONSOLE BEFORE LOADING OR UNLOADING A CARTRIDGE.
Adjust the picture
Adjust your monitor to get a clear image on the screen, if you are using a
television you will need to tune it:
Select a spare or unused channel then adjust the tuning control or if your
television has a rotary programme selector knob turn it until the image
on the screen becomes steady (the signal will be approximately at
channel 36).
Adjust the sound
Adjust the volume control as required. If there are no game sounds
-adjust the sound switch on the games console.
Pause
Press the pause button to freeze the game. Press it again to continue.
Stop
When you want to stop a game switch off using the Interlock/Power
switch and then remove the cartridge - DO NOT ATTEMPT TO REMOVE A
CARTRIDGE BEFORE SWITCHING OFF
5
Publicidad
