Proficook PC-WKS 1167 G Manual De Instrucciones página 10

Notes for Use
• A beep will sound when connected to the power outlet.
All control lamps light up briefly. The appliance then goes
into standby mode.
• As soon as you take the kettle off the base, two beeps
sound. The appliance returns to standby mode.
• Using the function buttons, you can select the optimum
water temperature of your drink.
• You can heat up water to the following specific tempera-
tures: 45 °C, 60 °C, 85 °C and 100 °C.
• After heating to the temperature 45 °C, 60 °C or 85 °C,
the water is automatically kept warm for 2 hours.
• You can use the tea strainer to prepare tea in your kettle.
Function Buttons and Indicator Lamps
In addition to the indicator lamps, the respective function is indicated via beeps. Please refer to the following table for the
associated function.
Button Indicator Lamp
45°C
Flashes slowly
60°C
85°C
Lights up
Flashes quickly
Lights up
Flashes slowly
Lights up
Change from dark to
light, to dark, etc.
Flashes slowly
Lights up
Preparation
Before using for the first time, boil fresh water at least three
times in the appliance. Use only water without any additives
or ingredients.
Information on the App
"Smart Life - Smart Living"
The Smart Life - Smart Living App is available for android
and iOS. Scan the corresponding QR code to get directly to
the download.
Depending on the provider, there may be costs involved in
downloading the app.
10
PC-WKS1167G_IM_02.2023
Mains Lead
Completely unwind the length of mains lead that you require
from the bottom section of the base. Please ensure that the
mains lead does not become tangled up.
Connected Wattage
The total power consumption of this appliance can be up to
2200 W. With this connected load a separate supply line pro-
tected by a 16 A household circuit breaker is recommended.
Electrical Connection
1. Check whether the mains voltage that you want to use,
2. Only connect the appliance to a properly installed safety
Number of Beeps / Function
1 × The temperature is selected and the heating process starts.
2 × The selected temperature is lower than the temperature of the water in the
appliance. The heating process will not start. Important! Before select a different
temperature, you need to press the respective button again. The indicator lamp
goes out again and the appliance will enter standby mode.
1 × The selected temperature has been reached.
1 × Press and hold the button for about 5 seconds to connect to the app.
(See chapter Information on the App "Smart Life - Smart Living".)
Connection to the app successfully established.
1 × Quick Start function. The water is heated to 100 °C.
The water is heated to the selected temperature.
The appliance is in standby mode.
1 × The water is heated to 70 °C and then will remain at this temperature for 2 hours.
You will be able to change the preset temperature via the app.
1 × The selected temperature has been reached.
Information on How to Use the App
This appliance allows you to operate the appliance via your
home network. A prerequisite is a permanent Wi-Fi con-
nection to your router and the free app "Smart Life - Smart
Living".
corresponds with that of the appliance. You will find the
information about it on the rating plate.
socket.
Google Play App Store
17.02.23