en
Overview
This instruction manual refers to various
models. An overview of the different models
can be found on the illustrated pages
(Fig. F).
Overview
Please fold out the illustrated pages.
X Fig. A
1 Base unit
2 Power cord
3 Cable clamp
4 Handle
5 5-level switch + instantaneous
switching
For switching the appliance on and off
and adjusting the operating speed.
P = switched off
1 = lowest speed
5 = highest speed
M = instantaneous switching (highest
speed), press left and hold down.
When using accessories in the rear
aperture, the appliance can be operated
using instantaneous switching only.
6 Ejector button
For removing the tools.
7 Apertures for inserting the tools with
lock
8 Slider for actuating the lock
When the slider is actuated, either the
aperture for inserting the tools (7) or the
rear aperture (11) is released (Fig. B).
w A perture for tools (7) is opened.
x Rear aperture (11) is opened.
9 Release buttons
For removing accessories from
the rear aperture. Press both buttons
simultaneously.
10 Stand with cord tidy
For setting the appliance down when
not in use and for winding up the power
cord.
11 Rear aperture with lock
For inserting accessories, e.g. the high-
speed hand blender.
Tools
12 Stirring whisks
13 Kneading hooks
12
On some models
14 High-speed hand blender
15 Blender jug with lid
16 Universal cutter
With the universal cutter, use the appliance
at full power to prepare honey spread
(according to the recipe). You can find
the recipe in the instruction manual
of the universal cutter.
If an accessory is not supplied as standard,
it can be ordered from customer service.
High-speed hand blender:
Plastic order no. 657242
Stainless steel order no. 657258
Universal cutter:
Order no. 659058
When using the accessories, follow
the separate instruction manual for
the accessories.
Operation
■ Before using the appliance for the first
time, clean the base unit and tools.
■ Always unwind the power cord
completely.
Important note: When the rear aperture is
open, the appliance can be operated using
instantaneous switching only. Selector
switch 1-5 will not function. Move slider for
actuating the lock in switch position P
only.
W Danger of injury due to rotating drive!
Never grip the rotating tools. Do not attach or
remove tools until the appliance is at a stand-
still – when switched off, the appliance
continues running briefly. Protect long hair or
loose items of clothing to prevent them from
becoming caught in the rotating tools
Base unit with tools
An especially good result is achieved
if the tools are used for the following
applications:
Stirring whisks for:
Sauces, egg whites, milk froth, cream,
mayonnaise, cream and light dough, e.g.
cake mixture.