Publicidad
Idiomas disponibles
Idiomas disponibles
12.5.4
The installation of the handle
12.5.5
Shelves
Each shelf can be removed to store larger bottles.
Normal shelve
12.5.6
To remove a shelf
Remove all bottles from the shelves.
Removal of the fixed shelves:
Carefully pull out the shelf until this is no longer possible.
Look at the shelf rail from the side.
You see a lever. There are 2 positions
1 = below - release with pressure at point A upwards
2 = up - release with pressure at point A down
The device comes with one metal stainless
steel handle. To install simply screw them to
the door with the supplied screws.
To do this, slide the rubber seal on the back
of the door to the side to lay open the
predrilled holes. Use the included screws to
install the handle on the door.
Then reinsert the rubber seal in the correct
position.
lower shelve
37
Publicidad
