CASO DESIGN WineSafe 18 EB Black 627 Manual Del Usuario página 41

15.2 Fault indications and rectification of faults
The following table assists in localizing and rectifying minor faults.
Fault
Wine refrigerator is not cold
enough.
The light does not work.
Vibrations & too much noise
& door does
properly
LED could not display.
LED display error – Lo
Buttons are not functional
Compressor will not start
Dew on the surface
cabinet：
Liquid sound
Condensation formed inside
the cabinet
Error code E2
► If you are unable to solve the problem with the steps shown above, please contact
Customer Service.
Check the temperature control setting.
External environment may require a higher setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The wine refrigerator does not have the correct clearance.
Contact customer service
Check to assure that the wine refrigerator is level. Check
not close the fan. Components are loose. The door is reversed and
not properly installed.
The seal is weak. The shelves are out of position.
Contact customer service
Room temperature is lower than desired temperature.
of The surface of wine cabinet especially the glass door
appear some frost if item in a damp room. This is due to
the moisture in the air coming into contact with the cabinet.
Please wipe it away with dry cloth.
1) The sound of compressor when starts or stops working
2) The flowing sound of refrigerant in the refrigeration
system
3) The evaporating sound of refrigerant in the evaporator
Under the environment with high level of humidity or the
door of wine cabinet has been left open for a long period
or opened frequently, wipe off the door. Open the door as
rarely as possible.
Desired temperature is not reached.
Contact customer service.
Please note
Possible Cause
41