Publicidad
Idiomas disponibles
Idiomas disponibles
A
EN
B
C
D
E
A y C
5. INSTALATION
To install the module, you must follow the next steps:
1.- Connect the module to the stove with the cable supplied in the external connection provided "telephone connection RS232" and switch on the
module by connecting it to the electric current with the supplied adapter.
5.- Connect the Smartphone to the "WIFI 4HEAT"
network. And press "CONTINUE".
Note: For Apple devices go to Settings→
Wireless; to find the Wi-Fi_4HEAT network.
On Android devices go to Settings→Settings-Wi-Fi;
to find the Wi-Fi_4HEAT network
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Ignition
Communication with stove
Comunicación WIFI
Reset
Configuration
Ignition
Flashing
Set
Flashing
Set
Flashing
Set
----
----
Flashing
Stove connection RS232
Net connection 5V
NOTE: Make sure there is a good WIFI network signal in your home.
2.- Install on your mobile phone the application 4HEAT that can be
downloaded directly from the servers PLAY STORE or APPLE STORE,
according to your Smartphone. Choose the desired language
3.- Register in the application 4HEAT by using an email and a personal
password.
Press the "Skip" key if you want to create the account later.
4.- Click on "ADD 4HEAT" button and press the E button of
"CONFIGURATION" in the module (4HEAT):
12
Error
OK
No communication with the stove
Communication set
Wifi not configured
Wifi configured
Press to reset the module
Press to configure the module
Module working on setting phase
REMOTE CONTROL WIFI2-B MODULE
Publicidad
