Publicidad
Idiomas disponibles
Idiomas disponibles
6.- You must then leave the Wi-Fi_4HEAT network and select the wireless
network of your house so that the module can be connected to it. Enter a
password that you own and press "OK".
In case the connection is made satisfactorily,
the following screen will be displayed and in
the module the LEDs A, B and C will remain
fixed:
In order to finish the configuration process
press "OK" and then close and open the
application.
From now on, you can manage the operation
of your stove or boiler remotely from your
Smartphone through a wifi network.
In case of not getting a correct connection,
you must press the configuration button E for
8 seconds and restart the APP and repeat the
previous steps. If the error persists, press the
reset button (D) on the module.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
7.- Generate the PIN you want to access
the application 4HEAT, as well as name
the module with the name you want, for
instance: HOUSE, SALON, KITCHEN,
HOUSE OF THE MOUNTAIN, etc.
6.
HOW THE APP WORKS
6.1.
HOMEPAGE
On the main APP page, a list of configured devices, name, main temperature and its state of each unit is displayed:
Meaning of the LEDs that appear next to each stove:
•
Red: stove Off
•
Green: stove On
•
Yellow: stove blocked due to an error
•
Grey: stove not connected
The setting button
allows you to access the menu of the 4HEAT module connected to the stove.
13
REMOTE CONTROL WIFI2-B MODULE
EN
Publicidad
