Pioneer SUPER TUNER III DEH-1450B Manual De Operación página 6

Tuner
1 Press
SOURCE
2 Use to adjust the sound level.
VOLUME
When you press
VOLUME
raised and when pressed down/–, the volume is
lowered.
3 Press to select a band.
BAND
Press until the desired band is displayed,
BAND
, , for FM or
FM1 FM2 FM3
4 To perform manual tuning, press 2 or 3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
or 3 for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
2 or 3 with a quick press.
• If you press and hold 2 or 3 you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the
light.
5 En
to select the tuner.
up/+, the volume is
.
AM
indicator will
STEREO ()
Storing and recalling broadcast
frequencies
If you press any of the
you can easily store up to six broadcast frequen-
cies for later recall with the touch of a button.
When you find a frequency that you want to
store in memory press a
ton and hold until the preset number stops
flashing.
The number you have pressed will flash in the
indicator and then remain lit.
PRESET NUMBER
The selected radio station frequency has been
stored in memory.
The next time you press the same
button the radio station frequency is
ING
recalled from memory.
Notes
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 AM stations can be stored in
memory.
• You can also use 5 and ∞ to recall radio sta-
tion frequencies assigned to
buttons.
buttons
PRESET TUNING
but-
PRESET TUNING
PRESET TUN-
PRESET TUNING