Publicidad
Idiomas disponibles
Idiomas disponibles
TOOL
OPERATION
CHECK:
CAUTION:
Remove
all fasteners
from tool
before performing
tool operation
check.
1. CONTACT TRIP OPERATION:
A. With finger off the trigger, press the contact trip against the work surface.
THE TOOL MUST NOT CYCLE.
D. Hold the toot off the work surface, and pull the trigger.
THE TOOL MUST NOT CYCLE.
C. With the tool off the work surface, pull the trigger. Press the contact trip against the work surface.
THE TOOL MUST CYCLE.
D. Without touching
the trigger, press the contact trip against the work surface,
then pull the trigger.
THE TOOL MUST CYCLE.
2. SEQUENTIAL
TRIP OPERATION:
A. Press the contact trip against the work surface, without touching
the trigger.
THE TOOL MUST NOT CYCLE.
D. Hold the toot off the work surface and pull the trigger.
THE TOOL MUST NOT CYCLE.
Release the trigger.
The trigger must return to the trigger stop on the frame.
C. Pull the trigger and press the contact trip against the work surface.
THE TOOL MUST NOT CYCLE.
D. With finger off the trigger, press the contact trip against the work surface.
Pull the trigger.
THE TOOL MUST CYCLE.
IN ADDITION TO THE OTHER WARNINGS
CONTAINED
IN THIS MANUAL
OBSERVE THE FOLLOWING
FOR SAFE OPERATION
• Use the BOSTITCH
pneumatic
tool only for the purpose
for which
it was designed.
• Never use this tool in a manner
that could cause a fastener
to be directed
toward
the user
or others
in the work area.
• Do not use the tool as a hammer.
• Always
carry the tool
by the handle.
Never carry the tool
by the air hose.
• Do not alter or modify
this tool
from the original
design
or function
without
approval
from
BOSTITCH,
INC.
• Always
be aware that misuse
and improper
handling
of this tool can cause injury
to
yourself
and others.
• Never clamp or tape the trigger
or contact
trip in an actuated
position.
• Never leave a tool
unattended
with the air hose attached.
• Do not operate
this tool if it does not contain
a legible
WARNING
LABEL.
• Do not continue
to use a tool that leaks air or does not function
properly.
Notify
your
nearest DOSTITCH
representative
if your tool continues
to experience
functional
problems.
-8-
Publicidad
