Publicidad
Idiomas disponibles
Idiomas disponibles
Become familiar with these terms before operating the
unit.
CFM: Cubic feet per minute.
SCFM:
Standard cubic feet per minute; a unit of
measure of air delivery.
PSIG: Pounds per square inch gauge; a unit of meas-
ure of pressure.
ASME: American Society of Mechanical
Engineers;
made, tested, inspected and registered to meet the
standards of the ASME.
Code Certification:
Products that bear one or more
of the following marks: UL, CUL, ETL, CETL, have
been evaluated by OSHA certified independent safety
laboratories and meet the applicable
Underwriters
Laboratories Standards for Safety.
Cut-In
Pressure:
While the motor is off, air tank
pressure drops as you continue to use your accesso-
ry. When the tank pressure drops to the factory set
low pressure the motor will restart automatically.
The
low pressure at which the motor automatically
restarts
is called "cut-in" pressure.
Cut-Out
Pressure:
When an air compressor
is
turned on and begins to run, air pressure in the air
tank begins to build.
It builds to a factory set high
pressure before the motor automatically
shuts off -
protecting your air tank from pressure higher than its
capacity.
The high pressure at which the motor shuts
off is called "cut-out"
pressure.
Branch Circuit: Circuit carrying electricity from elec-
trical panel to outlet.
This unit is capable of powering the following Accessories. The accessories are available through the current
Power and Hand Tool Catalog or full-line Sears stores.
Accessories
•
Caulk Gun
•
In Line Filter
•
Engine Cleaner
Tire Air Chuck
•
Sand Blaster
Quick Connector Sets
Carpentry
Tools
(various sizes)
•
Finishing Nailer / Stapler
Air Pressure Regulators
•
Construction Nailer/
Oil Fog Lubricators
Stapler
Air Hose:
Socket
Driving
1/4", 3/8" or 1/2" I.D.
•
1" impact Wrench
in various lengths
•
3/4" Impact Wrench
Specialty
Tools
•
1/2" Impact Wrench
Inflating/Blow Gun
•
3/8" Impact/Butterfly
Grease Gun
Wrench
1/2" Ratchet
•
Reciprocating Saw
3/8" Ratchet
•
Nibbler
1/4" Ratchet
Spray
Painting
Material
Shaping
•
Multi-Purpose Spray
2.625" Hammer
Gun
1.625" Hammer
•
Automotive Spray Gun
1/2" Drill
•
HVLP Spray Gun
,,
3/8" Drill
Finishing/Sanding
High Speed Rotary
•
High Speed Sander
Mini High Speed Rotary
•
Random Orbit Sander
Cut-Off Tool
•
6" DA Sander
Shear
•
Jitterbug Sander
4" Angle Grinder
•
Straight Line Sander
Contents
of Carton
1 - Air Compressor
2-
Wheels
2 - Shoulder Bolts, 3/8-16
2 - Hex Nuts, 3/8-16
2 - Rubber Bumpers
2-
Screws, 1/4-20
x .75
Tools Required
for Assembly
1 - 9/16" socket or open end wrench
1 - 1/2" socket or open end wrench
7- ENG
D23358
Publicidad
