Pioneer A-X540 Manual De Instrucciones página 7

PANEL FACILITIES
This component features a built-in microcomputer which will
recall the last set positions of the following switches for up
to about one week after the power cord is disconnected.
As a result, when the power is turned ON again, the
previously set positions will be recalled automatically:
e BASS EQ switch e POWER STANDBY/ON
e CD DIRECT and DAT © MUTING switch
DIRECT switches ® PURE DIRECT LINE
« CD DIRECT REC switch switch
e REC SELECTOR switches °¢ SPEAKERS swithes
e Input selector switches
CONNECTIONS
When the unit is disconnected the wall socket for more than
a week, the memorized setting positions will be erased, and
returned to the following settings:
@ POWER switch ..............000005 STANDBY
@ MUTING switch ........... 0.00.0 cece OFF
e Input selector switches................. TUNER
e BASS EO on/off switch...............004. OFF
¢ CD DIRECT and DAT DIRECT switches ....... OFF
e CD DIRECT RECORDING switches........... OFF
e REC SELECTOR switches .............. SOURCE
e PURE DIRECT LINE switch................0. OFF
© SP-A, SP-B selector switches .............. OFF
See page 3 for Connections.
Components to be connected.
Turntable
©
Tape deck
CD player Didital audio tape deck
Tuner , (1) Shorting bars
Speaker system B (R) @ Video cassette recorder
Speaker system B (L) @
AC wall socket
Power cord
Connect this cord to an AC
wall socket, or the AC
Speaker system A (L) outlet of an audio timer.
OWQOOOOOO
Speaker system A (R)
CONNECTING SPEAKER WIRES
1. Strip off the vinyl covering and twist the tip of the wire.
10mm
Raise the lever in the direction of the arrow and insert
the exposed conductor into the hole.
3. Now return the lever to its original position to secure
the cord.
NOTE:
Do not allow any of the cord conductors to protrude from the
terminals or touch any other conductors. Malfunctioning or
breakdowns may occur when conductors come into contact with
each other.
CONNECTING INPUT/OUTPUT CORDS
Connect the white plug to the L (left) side, and the red plug
to the R (right) side. Be sure to insert the plugs securely.
Red plug
Speaker Impedance
When speaker systems are connected to only one pair of
the SPEAKERS A or B terminals, the speakers should have
a rated impedance in the range of 8—160.
Connection of a graphic equalizer or an audio
adapter
NOTE:
Remove the shorting bars only when connecting a graphic equalizer
to the ADAPTOR terminals. Always keep the bars inserted while
the terminals are not in use, and take care not to lose them.
IN
OUT
Shorting bars
@®
A-X540
BR5B000088 St 00008B0800
Graphic equalizer 7
<ARE1080>
LURES ENNIS
SANTEE ITEATERY
SERS
SS NEREET
SSR RE ANA PSS
SES
SESE SSS TSA RS SES ST EES
SS ESAT ERA SESE STH
ssa rSEERNNSNRRA
maT SOE
S ES SSS LES OPT GRIT ESE ESN FEB SEN TSU TAS
sos