Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 20-30 minutes (24 hours for adhesive to dry).
Tools Required for Assembly (not included): Phillips screwdriver, utility knife or scissors,
adhesive, power drill with drill bit
Helpful Tools (not included): Measuring tape, level
INSTALLATION INSTRUCTIONS
Note: Clean area where the vanity (A) will be
permanently located prior to beginning
installation, ensuring the vanity (A) will not
interfere with any water supply and drain
lines once mounted.
1. With two people, carefully place vanity (A) with
(B)
top
against the wall in its
Find and mark locations of wall studs behind
the permanent location of vanity (A).
Note: Use preassembled levelers on legs of
vanity (A) to level the item. Twisting the
levelers counterclockwise will increase the
height of vanity (A), twisting them clockwise
will decrease it.
WARNING
Vanity (A) MUST be secured to wall.
1
location.
3
B
A
Publicidad
