Storage And Transportation - Nahita ZFP011 Manual De Instrucciones

6. Only use mild commercial detergents or soap solution for cleaning. Do not use solvent
that contains acetone and benzene!
7. Use dry fabric or dumped by little detergent to clean the surface of the instrument.
8. Make sure, no detergent liquid enter the instrument during the cleaning. After cleaning,
dry the surface of the instrument with a soft cloth.
9. Keep clean all parts of the instrument after use. Use the blade holder to move on the
sliding rail, infuse the detergent lubricant. Good maintenance to the instrument will prolong the
life of the instrument.
Warning: it is allowed to use normal commercial detergents or soap solution for disinfection. Do
not use solvent that contains gasoline, acetone or benzene! It is not allowed liquid to flow inside
the instrument
10. Once cleaning is over, install entire subassembly of blade holder and waste tray
according to opposite procedure
11. Microtome can work long time without daily care, however, in order to operate normally
within a long period, it is advisable to clean the instrument after end of work. Lubricate every
month the parts of blade holder by lubricating oil provided with the equipment. Lock Handle
shaft, slipper block, pressed compact dump rail etc, in order to reach the best result of use.

11. Storage and transportation

1. Environmental temperature: -5℃～+55℃；
2. Environmental moisture: ≤85℅
3. Atmospheric pressure: 860hpa～1060hpa
4. Before transportation of this machine, please check if it's locked and if marks are
complete. The microtome must be erectly transported!
12. Packing list
 Microtome Advanced
 Hexagon spanner
 User's manual
 Brush
 Waste tray
 Cassettes
Manual de instrucciones Instruction manual 45 Versión Version 2017