Tribest slowstar SW-2020 Manual De Uso página 13

• Do not insert any utensils, knives, or fingers into the Slowstar. Please use the Plunger to push down
the food. Placing foreign objects into the juicer may damage some parts of the machine, cause
in jury, or accident.
• Do not insert fruits without removing hard seeds first. Hard seeds in the feeding chute may damage
or cause the machine to malfunction.
What to do if the Slowstar stops working while in operation.
If the Slowstar stops in the middle of operation, please turn the switch to the 'OFF' position first. Turn
the switch to 'REVERSE' position and dislodge the fruit or vegetable pieces that are stuck between
the Duoblade Auger and the Auger Housing. Turn the switch to the 'OFF' position then to the 'ON'
position. (Repeat this procedures up to 3 times or as many times as necessary). Upon releasing the
'REVERSE' button, the Slowstar will stop.
• While operating the Slowstar in the 'ON' position, please turn the switch to the 'OFF' position
and wait until the Slowstar stops completely before using the 'REVERSE' function. If the Slowstar
is switched to 'REVERSE' before the Slowstar stops completely, it may cause a malfunction.
• If the Slowstar still does not work, please turn the switch to the 'OFF', unplug the Slowstar,
disassemble the parts and clean it before trying to operate again.
How to use the Mincing Attachment
1. Assemble the Auger Housing for Mincer with the Main Body. Rotate the housing clockwise towards
the Safety Link.
2. Place the Duoblade Auger into the middle of the Auger Housing for the Mincer.
3. Match the Mincer Lid marks with the Auger Housing for Mincer marks, and then rotate the Mincer
Lid towards the Auger Housing for Mincer handle marks to lock in place.
4. Place a container under the Outlet.
5. Put ingredients into the Feeding Chute.
EN
13