tomado TMF7524B Instrucciones De Uso página 12

Check that the voltage corresponds with what is stated on the information plate. Insert the plug in the socket.
Mount the whisk at the bottom of the milk frother. Fill the milk frother with the required amount of milk. Take note of the lower
maximum indication for frothing milk - MAX
using too much milk. The minimum capacity is 75 ml.
Making hot milk froth
Place the cover and place the milk frother on the power base. Briefly press the button to switch on the milk frother.
Both indicator leds (blue/ red) light up and the whisk starts to rotate. Depending on the amount of milk, the milk frother stops
automatically after approximately 90 seconds. The blue indicator led switches off and the red indicator led continuous to flash
for approx. 30 seconds to indicate that the milk frother is ready.
Making cold milk froth
Place the cover and place the milk frother on the power base. Hold the button down for 1-2 seconds to switch on the milk
frother. The blue indicator led lights up and the whisk starts to rotate. Depending on the amount of milk, the milk frother stops
automatically after approximately 60 seconds. The blue indicator led switches off and the red indicator led continuous to flash
for approx. 30 seconds to indicate that the milk frother is ready.
When the milk frother is ready, remove the cover and pour the milk froth in a mug or cup. Only hold the milk frother by
its handle. The rest of the appliance will be hot. Do not use a spoon or other metal object to scoop out the milk froth.
This will damage the coating.
After use, the milk frother should be cleaned as described in chapter CLEANING & MAINTENANCE.
Allow the milk frother to cool for 2 minutes before using it again or rinse the milk frother with cold water. By doing this,
you can start using it again sooner.
TIPS
• You will get the best milk froth result with full-cream milk.
• If there is too little milk in the milk frother (less than 75 ml), the result will be less good.
• The quality of the milk froth can differ significantly between different brands of milk. Experiment with other brands,
if necessary, for a better result.
Remove the plug from the wall socket and allow the milk frother to cool prior to cleaning.
Clean the milk frother after each use.
Never submerge the milk frother and power base in water and/or any other liquid. Also do not rinse it under the tap.
Regularly wipe the outside with a moist cloth.
Remove the whisk or mixer from the milk frother by lifting it straight upwards. Pour some hot water in the milk frother
to remove all milk residues. If necessary, use a drop of washing-up liquid to remove the fatty film left by the milk. Then wipe
clean the inside of the milk frother with a soft cloth or some kitchen paper to prevent the coating from getting damaged.
Make sure there are no more milk residues in the milk frother. This is unhygienic and could be harmful to your health. Clean
the cover, silicone ring of the cover, whisk and mixer with warm water and a mild washing-up liquid. Dry these components
thoroughly.
Never use detergents and/or abrasives or sharp objects that could damage the coating!
The crossed out wheelie bin symbol means that this product shall not be disposed of with normal household waste.
Electronic and Electrical Equipment not included in the selective sorting process are potentially dangerous for the
environment and human health due to the presence of hazardous substances. Please dispose of responsibly at an
approved waste or recycling facility.
TMF7524B-manual-0523.indd 12 TMF7524B-manual-0523.indd 12
FROTHING MILK
- 115 ml. Frothing milk expands and the milk frother could overflow when
CLEANING AND MAINTENANCE
RECYCLING
EN - 12
2-6-2023 16:12:45 2-6-2023 16:12:45