Troy-Bilt 020240 Manual De Instrucciones página 11

Section 4: Opecation
How to Use Accessory Tray
The unit is equipped with an accessory tray with pHacesto
store your rotating brush_ utiHity brush_ turbo nozzHe_ and
ProjectPro TMnozzHes.There is aHsoa hook at the front of
the accessory tray to hoHdyour hgh pressure hose.
H. Store your gun and nozzHe extension on the hooks
attached to the base and handHe,as shown in Figure H 3.
2. PHacerotating brush through hoHe on accessory tray on
right side of unit (Figure H 3).
3. PHaceutility brush through hoHe on accessory tray, as
shown in Figure H3.
3. Push turbo nozzHe up and into chip on accessory tray
untiH it snaps in, as shown in Figure H 3.
4. Hang high pressure hose on hook attached to accessory
tray on front of tray, as shown in Figure H 3.
How to Use ProiectPro
TM
Nozzle
The quick-connect on the nozzle extension allows you to
switch between four different ProiectPro TMsystem nozzHes.
The ProiectPro TM nozzHes vary the pressure and spray
pattern as shown (Figure H4).
cAuTlo. 1
Low Pressure
Black
Use to appHy
/
detergent
High Pressure
DeHicate
40 ° Yellow
H 750 PSi
2.3 GPH
\
General Max
5° Orange 0 ° Red
2200 PSI 2550 PSi
2.2 GPH 2.0 GPM
Follow these instructions to change ProjectPro -rM
nozzles:
H. Engage trigger Hock on spray gun.
2. PuHH bacH<coHHar o n quick-connect and puHH current
ProiectPro TMnozzHe off. Store ProiectPro TMnozzHes in
hoHder provided on the accessory tray.
3. SeHect desired ProiectPro TM nozzHe:
For delicate rinse (lower pressure and higher
fiow)_ for gentle cHeaning of cars/trucks_ boats_ RV's_
patio furniture, lawn equipment_ etc., seHectyellow
Delicate ProiectPro TMnozzHe (Figure H5).
TM
NEVER exchange ProiectPro nozzles withou_ locking the
trigger lock on the trigger,
DO NOT twist ProiectPro TMnozzles while spraying.