Publicidad
Idiomas disponibles
Idiomas disponibles
12.Insertotherendof link(E)intoholein
frontmowerbracket ( H)andsecurewith
washerandretainer spring(J)
8, ATTACH REARUFT LINKS(C)- Insert
rodendof linkassembly intoholein trac-
tor liftshaftsuspension arm (L)andpivot
linkdownto mowerLiftrearcornerof
mowerandposition slot in linkassembly
overpinon rearmowerbracket(D)and
securewithwasherandretainer s pring.
9. Repeaton oppositesideoftractor.
13_Disengage belt tension rod (K) from lock-
ing bracket (L)_
14. Install belt onto engine clutch pulley (M).
IMPORTANT:
Check belt for proper routing
in all mower pulley grooves.
10. Turn steering wheel to position wheels
straight forward.
11. ATTACH FRONT LINK (E) - Work from
left side of tractor, Insert rod end of tink
assembly through
front hole in tractor
front suspension
bracket (F) and secure
with retainer spring (G) through hole in
link located behind the bracket.
15. Engage belt tension rod (K) on locking
.
bracket (L).
CAUTION:
Belt tension rod is spring
loaded. Have a tight grip on rod and engage
slowly.
16, Raise attachment
lift lever to highest
position.
17. [f necessary,
adjust gauge wheels
before operating
mower as shown in the
Operation
section of this manual.
02937A
10
Publicidad
