Descargar Imprimir esta página

Craftsman 917.28690 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles

Idiomas disponibles

9/16
TO OPERATE
MOWER
Your tractor
is equipped
with an operator
presence
sensing
switch.
Any attempt
by the operator
to leave the seat with the
engine running
and the attachment
clutch
engaged
witl shut off the engine. You must
remain fully and centrally
positioned
in the
seat to prevent
the engine from hesitating
or cutting
off when operating
your equip-
ment on rough,
rolling terrain or hills.
1.
Select desired
height of cut with at-
tachment
lift lever,
2, Start mower
blades by engaging
at-
tachment
clutch control.
TO STOP MOWER
BLADES
-
disengage
attachment
clutch control.
_IbCAUTION:
Do not operate
the mower
without
either the entire grass catcher,
on mowers
so equipped,
or the deflector
shield (S) in place.
REVERSE
OPERATION
SYSTEM
(ROS)
Your tractor
is equipped
with a Reverse
Operation
System
(ROS)_ Any attempt
by
the operator
to travel in the reverse
direc-
tion with the attachment
clutch engaged
wilt shut off the engine unless ignition
key
is placed in the ROS "ON" position.
A_,WARNING:
Backing
up with the at-
tachment
clutch engaged
while mowing
is strongly
discouraged,
Turning the ROS
"ON", to allow reverse operation
with the
attachment
clutch engaged,
should
only
be done when the operator
decides
it is
necessary
to reposition
the machine
with
the attachment
engaged.
Do not mow
in
reverse
unless
absolutely
necessary,
USING THE REVERSE
OPERATION
SYSTEM
-
Only use if you are certain no children
or
other bystanders
witl enter the mowing
area.
t,
Depress
brake pedal all the way down.
2. With engine
running,
turn ignition
key
counterclockwise
to ROS "ON" posi-
tion,
3.
Look down and behind
before and
while backing_
4_ Slowly depress
reverse
drive pedal to
start movement,
5. When
use of the ROS is no longer
needed,
turn the ignition
key clockwise
to engine "ON" position.
ROS "ON" Position
Engine "ON" Position
(Normal Operating)
PERATE
ON HILLS
ARNING:
Do not drive up or down
hills with slopes greater
than 15 ° and do
not drive across
any stope, Use the slope
guide provided
at the back of this manual.
• Choose the slowest
speed
before start-
ing up or down hills.
. Avoid stopping
or changing
speed
on
hills°
. If stopping
is absolutely
necessary,
push
brake pedal quickly
to brake position
and engage
parking
brake.
• To restart movement,
slowly release
parking
brake and brake pedal,
• Slowly
depress
appropriate
drive pedal
to slowest setting.
• Make all turns slowly,
TO TRANSPORT
When
pushing
or towing
your tractor, be
sure to disengage
transmission
by placing
freewheel
control
in freewheeling
position,
Freewheel
control
is located at the rear
drawbar
of tractor.
1. Raise attachment
lift lever to its highest
position,
2,
Pull freewheel
control
out and into the
slot and release
so it is held in the
disengaged
position.
'16

Publicidad

loading