Publicidad
Idiomas disponibles
Idiomas disponibles
CHECK
TIRE
PRESSURE
The tires on your tractor
were overinflated
at the factory for shipping
purposes_
Cor-
rect tire pressure
is important
for best
cutting
performance.
• Reduce tire pressure
to PS1 shown
on
tire&
CHECK
DECK
LEVELNESS
For best cutting
results, mower
hous-
ing should
be properly leveled.
See "TO
LEVEL MOWER"
in the Service and
Adjustments
section
of this manual.
CHECK
FOR
PROPER
POSITION
OF ALL
BELTS
See the figures
that are shown for replac-
ing motion and mower blade drive belts
in the Service
and Adjustments
section
of this manual.
Verify that the belts are
routed
correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate
your trac-
tor, check to see that the brake is operat-
ing properly.
See "TO CHECK
BRAKE"
in the Service
and Adjustments
section
of
this manual.
v'CHECKLIST
Before you operate
your new tractor, we
wish to assure that you receive
the best
performance
and satisfaction
from this
Quality Product°
Please
review the following
checklist:
J All assembly
instructions have been
completed,
v" No remaining
loose parts in carton.
J Battery
is properly
prepared
and
charged.
v" Seat is adjusted
comfortably
and tight-
ened securely_
v" All tires are properly
inflated_ (For ship-
ping purposes,
the tires were overin-
fiated at the factory).
v" Be sure mower deck is properly
leveled
side-to-side/front-to-rear
for best cutting
results.
(Tires must be properly
inflated
for leveling).
¢" Check
mower and drive belts
Be sure
they are routed
properly
around pulleys
andinside
all belt keepers.
v" Check wiring.
See that all connections
are still secure
and wires are properly
clamped.
J" Before
driving tractor, be sure freewheel
control is in "transmission
engaged"
position
(see "TO TRANSPORT"
in the
Operation
section
of this manual).
While
learning
how to use your tractor,
pay extra attention
to the following
impor-
tant items:
J Engine
oil is at proper level.
,/' Fuel tank is filled with fresh, clean,
regular unleaded
gasoline.
,/Become
familiar
with all controls,
their
location
and function.
Operate
them
before you start the engine
v" Be sure brake system
is in safe operat-
ing condition_
v" Be sure Operator
Presence
System
and Reverse
Operation
System
(ROS)
are working
properly
(See the Opera-
tion and Maintenance
sections
in this
manual).
J It is important to purge the transmission
before operating
your tractor for the first
time. Follow proper starting and transmis-
sion purging instructions
(See "TO START
ENGINE" and "PURGE TRANSMISSION"
in the Operation
section of this manual).
11
Publicidad
