GE 16 Serie Manual Del Propietario E Instalación página 3

IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
GEAppliances.com
AWARNING!
HOW TO CONNECTELECTRICITY
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
For personal safety, this appliance must be properly grounded.
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the
possibility of electric shock hazard from this appliance.
Have the wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly grounded.
Where an ungrounded 2-prong wall outlet is
encountered, it is your personal responsibility and
obligation to have it replaced with a properly grounded
3-prong wall outlet.
The refrigerator should always be plugged into its own
individual electrical outlet which has a voltage, wattage
and frequency that match the rating plate.
This provides the best performance and also prevents
overloading house wiring circuits which could cause a
fire hazard from overheated wires.
Never unplug your refrigerator by pulling on the power
cord. Always grip plug firmly and pull straight out from
the outlet.
Repair or replace immediately all power cords that have
become frayed or otherwise damaged. Do not use a
cord that shows cracks or abrasion damage along its
length or at either end.
When moving the refrigerator away from the wall, be
careful not to roll over or damage the power cord.
USE OF EXTENSION CORDS
Because of potential safety hazards under certain conditions, we strongly recommend against the use of
an extension cord.
However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed (in the United States)or
a CSA-listed(in Canada), 3-wire grounding type appliance extension cord having a grounding type plug and outlet
and that the electrical rating of the cord be 15 amperes (minimum) and 120 volts.
READAND FOLLOWTHIS SAFETYINFORMATIONCAREFULLY.
SAVETHESE INSTRUCTIONS
About the temperature control dial.
Turning the dial to OFF stops cooling in both compartments-fresh food and freezer. It does not shut off power to
the refrigerator.
Temperature Control Dial (on some models)
The temperature control dial adjust refrigerator from warmest to coldest.
The recommended factory setting is shown in illustration to the left. For colder temperature
turn dial clockwise toward snowflake. For warmer temperature turn dial counter clockwise
away from snowflake, allow 24 hours for adjustment.
Recommened
factory setting Coldest setting Warmest setting