Publicidad
Idiomas disponibles
Idiomas disponibles
Alarm function signals high blood pressure
Blood
pressure
values for both systolic and diastolic readings are
determined
and indicated via a three-color LED system as being within
normal or hypertensive ranges based on definitions and classification of
blood pressure levels by the JNC 7. Moreover, when blood pressure is in the
high range, the reading displayed on screen flashes on and off to alert user.
According to JNC 7 Classification, values consistently in excess of 140 mmHg
(Sys.) and/or 90 mmHg (Dia.) are considered to constitute high blood pressure.
Fig.8
Blood
ree
Diastolic
i
(mmHg)
TO
LED Colors
Hypertension
O Orange bees
- (Stage 1, Stage 2)
+ O Yellow
- Prehypertension
O Green
-
120
140 (mmHg)
Systolic
Fig. 9-a
ws. 7, ==
° Blood pressure readings will flash for approx. 6 seconds
asl to {=
3
when in the high blood pressure range (Fig. 9-a).
N
Systolic blood pressure:
140 mmHg and over
Diastolic blood pressure:
90 mmHg and over
(Only when measurement is complete)
When an Error Occurs During Measurement
Fig. 9-b
An E will appear on the display to indicate that measurement
Ea
was unsuccessful and should be performed again (Fig. 9-b).
Before performing another measurement, always press the
On/Off and Start button to turn off the unit and make sure to
allow a rest period of 4 to 5 minutes before starting again.
15:30
Please consult your doctor without delay if the blood
pressure indicator repeatedly draws attention to elevated
blood pressure values.
18
Publicidad
