Panasonic EW3039 Instrucciones De Funcionamiento página 11

Setting the time and date
Having inserted the batteries, set the time and date so that any future stored
measurements are saved in the memory with the correct time and date.
(If you attempt to take measurements without first setting the time and date
then "—' will be displayed.)
ate
1s
Press the Set button "1" on the side of the unit for
at least 3 seconds.
The displayed date will flash on and off (Fig. 4-a).
If the date and time have already been set and
the button is not held pressed long enough,
the display will change to the measurement
notification sound setting display.
Adjust the month.
Press the Adjust button "2" to adjust the number
of the month (Figs. 4-b).
Adjust the date.
(1) Press the Set button "1" and the number for
the date will flash (Fig. 4-c).
(2) Press the Adjust button "2" to adjust the
number of the date.
Adjust the hour.
(1) Press the Set button "1" and the time will
flash on and off (Fig. 4-d).
(2) Press the Adjust button "2" to adjust the
number of the hour.
Adjust the minutes.
(1) Press the Set button "1" and the number for
minutes will flash (Fig. 4-e).
(2) Press the Adjust button "2" to adjust the
number of minutes.
Finally, synchronizing with a time signal, press
the Set button "1" to complete the procedure (Fig.
4-f).
Press the On/Off and Start button to turn off the unit.
10