Panasonic EW3039 Instrucciones De Funcionamiento página 27

Setting (checking) the measurement notification time
Fig. 14-a
woe
. y
Fig. 14-b
Fig. 14-e
añ
adl
asian
To let you take measurements at the same time every
day, 3 times per day can be set as notification times.
1. Press the Set button on the top surface of the blood
pressure monitor (Fig. 14-a).
e Notification Time 1 will blink (Fig. 14-b).
* If date and time have not been set, or have pressed
for more than 3 seconds, the display will change to
the date/time setting display.
2. Press the Set button again.
e The & and of F will blink (Fig. 14-c).
3. Press the Adjust button to display on.
* The A and on will blink (Fig. 14-d).
* on — Notification sound will sound.
* of F = Notification sound will not sound.
+ When on is displayed and the Set button is
pressed, the time becomes 1:00 and the A
and on will light.
4. (1) Press the Set button. The hour value will blink
(Fig. 14-e).
(2) Press the Adjust button repeatedly to set the
desired hour.
26