Netum RS-8000BT Manual De Instrucciones página 14

Beep Tone Indication
Beep Type Beep/Tone
Prompt Tone 1 Beep in 2 Tones
1 Beep in 3 Tones
1 Short Beep
Two Beeps in Same Tone
Warning Tone Three Beeps in Same Tone
Five Beeps in Same Tone
FAQ
Problem: Some Barcodes Cannot be read.
Solution:
1. Dirty or unclear barcodes might not be read.
2. The possible reason is that setting for some barcodes types are not
commonly used is off by default. You need to activate a specific
barcode type to get it to work. Please contact us for help.
Question: Is there any barcodes for applying or removing suffix?
Yes. Please turn to customer service for help.
Question: How to solve the messy code problem encountered while
using other foreign languages?
Solution:
Default language is English. If you use other types of keyboard please
refer to "Keyboard language", see page 5.
Problem: Barcodes can be read but can not be displayed
Indication
Scan Code under Store Mode/ Power Off
Power On/ Successful Configuration/ Finish
Uploading
Successful Scan
Low Battery Volume Warning
Error on saving barcodes under Store Mode
Transmission failed
Fail to power on due to low battery volume
(11)