Publicidad
Idiomas disponibles
Idiomas disponibles
Section 3: Assembly
Spray Gun Hook
/I
/
/
/
/ Hose Hook
_[ne
0[[
and
Fuel
° Place pressure washer on a [eve[ surface.
1
• Refer to engine manualfor oil and fuel fill information,
• Damage to equipment resulting from failure to follow this
instruction will void warranty_
° Refer to engine owner's manuaHand follow oH and fueH
recommendations
and instructions,
NOTE,"
Check oH often during engine break-in, Refer to
engine owner's manual for recommendations,
1
Connect
Hose
and Water
Supply
to
IMPORTANT:To
avoid pump damage, you must assemble
the nozzle extension
to the spray gun and attach
all hoses
before you start the engine.
I.
Attach
one end of high pressure
hose to high pressure
outlet
on pump (Figure 4).Tighten
by hand.
2.
Attach
other
end of hose to base of spray gun
(Figure 5).Tighten
by hand.
Here
O
Publicidad
