DeWalt DWF83PT Manual De Instrucciones página 16

MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART BELOW.
FOR MORE SERIOUS OR PERSISTENT PROBLEMS, CONTACT A D
fasteners from magazine before making any adjustments or servicing this tool.
SYMPTOM CAUSE
Skipping nails; intermittent feed Air restricted
Lack of lubrication
Nosepiece screws loose
Wrong size/angle fasteners
Dirty magazine
Damaged/Worn magazine
Broken or damaged driver blade
Trigger valve o-ring worn or
damaged
Worn piston o-ring
Worn or damaged pusher spring
Fasteners jam in tool Driver channel in nosepiece worn
Wrong size/ angle fasteners
Worn driver blade
Nosepiece screws loose
Nails not feeding properly
TROUBLESHOOTING GUIDE
WARNING: To reduce the risk of serious personal injury, remove
FIX
Check air supply and couplers
Lubricate tool using D
Tighten nosepiece screws using appropriate hex wrench
Use only recommended fasteners
Clean magazine track and nosepiece
Replace magazine
Replace driver blade
Replace valve using Trigger Valve Kit
Replace O-ring using Framing Nailer O-Ring Repair Kit
Replace spring using Magazine Pusher Spring Kit
Replace nosepiece
Use only recommended fasteners
Replace driver blade
Tighten nosepiece screws using appropriate hex wrench
Ensure nails are feeding properly through the magazine and into the nose
14
WALT SERVICE CENTER OR CALL 1-(800)-4-D
e
WALT pneumatic tool oil
e
WALT.
e