ICS Schneider Messtechnik IDT 600 Manual De Instrucciones página 5

Introduction
The IDT 600 is an effective barrier against the transfer of
moisture and dirt from a device under test to a Druck portable
pressure calibrator. Installed directly on the calibrator pressure
port, regular use of the IDT 600 will prevent contamination of the
calibrator's pneumatic system, improve long-term reliability, and
reduce maintenance costs.
In addition, it prevents dirt or moisture from one device under
test being transferred to another via the calibrator. The IDT 600
has no diaphragm or other internal components that could
create a pressure drop and does not affect calibration accuracy.
The unit is also simple to dismantle and easy to clean.
Safety
WARNING
maximum safe working pressure to the equipment.
To prevent a dangerous release of pressure, isolate
and bleed the system before disconnecting a
pressure connection.
To prevent a dangerous release of pressure, make
sure that all the related pipes, hoses and equipment
have the correct pressure rating, are safe to use and
are correctly attached.
The IDT 600 has been designed to be safe when operated using
the procedures detailed in this manual. Do not use this
equipment for any other purpose than that stated, the protection
provided by the equipment may be impaired.
Before installing and using the IDT 600, read and understand all
the related data. This includes: all local safety procedures,
instructions for the accessories, options and equipment you are
using it with, and this document.
Do not apply pressure greater than the
Copyright 2003 Baker Hughes Company.
English–IDT600 Instruction Manual | 1