Descargar Imprimir esta página

Craftsman 917.28927 Manual Del Operador página 13

Ocultar thumbs Ver también para 917.28927:

Publicidad

Idiomas disponibles

Idiomas disponibles

TO STOP MOWER
BLADES
=
Disengage attachment
clutch control.
_IbCAUTION:
Do not operate the mower
without either the entire grass catcher,
on mowers so equipped, or the deflector
shield (S) in place.
REVERSE OPERATION SYSTEM (ROS)
Your tractor is equipped with a Reverse
Operation System (ROS). Any attempt by
the operator to travel in the reverse direc-
tion with the attachment
clutch engaged
will shut off the engine unless ignition key
is placed in the ROS "ON" position.
_L, WARNING:
Backing up with the at-
tachment
clutch engaged while mowing
is strongly discouraged.
Turning the ROS
"ON", to allow reverse operation with the
attachment
clutch engaged, should only
be done when the operator decides it is
necessary to reposition the machine with
the attachment
engaged. Do not mow in
reverse
unless absolutely
necessary.
USING
THE REVERSE
OPERATION
SYSTEM
-
Only use if you are certain
no children
or
other
bystanders
will enter the mowing
area.
1.
Depress
brake
pedal
all the way down.
2.
With
engine
running,
turn
ignition
key
counterclockwise
to ROS "ON" position.
3.
Look down
and behind
before
and
while
backing.
4.
Slowly
depress
reverse
drive
pedal to
start movement.
5.
When
use of the ROS is no longer
needed,
turn the ignition
key clockwise
to engine
"ON" position.
ROS "ON" Position
Engine "ON" Position
(Normal Operating)
TO OPERATE
ON HILLS
,II_WARNING:
Do not drive up or down
hills with slopes greater than 15 ° and do
not drive across any slope. Use the slope
guide provided at the back of this manual.
• Choose the slowest speed
before start-
ing up or down hills.
• Avoid stopping orchanging
speed on hills.
• If stopping is absolutely necessary,
push
brake pedal quickly to brake position
and engage parking brake.
• To restart movement,
slowly release
parking brake and brake pedal.
• Slowly depress appropriate
drive pedal
to slowest setting.
• Make all turns slowly.
TO TRANSPORT
When
pushing
or towing
your tractor,
be
sure to disengage
transmission
by placing
freewheel
control
in freewheeling
position.
Freewheel
control
is located
at the rear
drawbar
of tractor.
1.
Raise
attachment
lift lever to its highest
position.
2.
Pull freewheel
control
out and into
the slot and release
so it is held in the
disengaged
position.
• Do not
push or tow tractor
at more than
two (2) MPH.
• To re-engage
transmission,
reverse
above
procedure.
TRANSMISSION
ENGAGED
TRANSMISSION
DISENGAGED
NOTE: To protect hood from damage
when transporting
your tractor on a truck
or a trailer, be sure hood is closed and se-
cured to tractor.
Use an appropriate means
of tying hood to tractor (rope, cord, etc.).
TOWING
CARTS AND OTHER ATTACH-
MENTS
Tow only the attachments
that are recom-
mended by and comply with specifications
of the manufacturer
of your tractor. Use
common sense when towing. Too heavy
of a load, while on a slope, is dangerous.
Tires can lose traction with the ground and
cause you to lose control of your tractor.
13

Publicidad

loading