Keys
(1) Oil Drain Tube
For Future Use
Slope Sheet
(2) Keys
Your new tractor has been assembled
at the factory with the exception of those parts left
unassembled
for shipping purposes.
When right or left hand is mentioned in
this manual, it means, from your point of
view, when you are in the operating posi-
tion (seated behind the steering wheel).
TO REMOVE TRACTOR
FROM
CARTON
UNPACK CARTON
1. Cut along dashed lines on all four pan-
els of carton. Remove end panels and
lay side panels flat.
2. Remove protective
materials from trac-
tor hood and grille.
IMPORTANT:
Check for and remove any
staples in skid that may puncture tires
where tractor is to roll off skid.
CH ECK BATTERY
1.
Lift hood to raised
position.
NOTE:
If this battery
is put into service
after month
and year indicated
on label
(L) (label
is located
between
terminals)
charge
battery
for minimum
of one hour at
6-10 amps.
(See "BATTERY"
in Mainte-
nance
section
of this manual
for charging
instructions).
ADJUST
SEAT
1. Sit in seat.
2. Lift up adjustment
lever (A) and slide
seat until a comfortable
position is
reached which allows you to press
clutch/brake
pedal all the way down.
3. Release lever to lock seat in position.
NOTE:
You may now roll your tractor
off
the skid. Follow
the appropriate
instruction
below
to remove
the tractor
from the skid.
WARNING:
Before
starting,
read,
un-
derstand
and follow
all instructions
in the
Operation
section
of this manual.
Be sure
tractor
is in a well-ventilated
area.
Be sure
the area in front of tractor
is clear
of other
people
and objects.
TO ROLL
TRACTOR
OFF SKiD
(See Operation
section
for location
and function
of controls)
1. Raise attachment
lift lever to its high-
est position.
2. Release parking brake by depressing
brake pedal.
3. Place freewheel
control in disengaged
position to disengage transmission
(See "TO TRANSPORT"
in the Opera-
tion section of this manual).
4. Roll tractor forward off skid.
5. Remove banding holding the deflector
shield up against tractor.
7