• The product must be placed on a horizontal, flat and stable surface, protected from
collisions, even accidental, with moving parts of any kind
• The product must not be placed within the opening range of doors and windows,
shutters, curtains, seesaws, movable walls or the like
• Do not move the product while it is in operation
• Do not use the product after a knock or a fall: have it checked for integrity by
competent technical personnel
• Do not cover the ventilation grilles in any way, rather make sure that they can access
an area with good air circulation
• Do not introduce any objects into the ventilation grilles and check that this cannot
happen accidentally during the entire period of operation
• Before proceeding with cleaning operations, make sure that the appliance has been
off for at least 15 minutes and that the electrical plug has been disconnected
• To clean the product, use a damp cloth and avoid any abrasive or aggressive detergent;
wait for it to dry completely before putting it back into operation
• Do not install or use the appliance in direct sunlight, in excessively humid
environments, saturated with gas, vapors or other suspended substances, near open
flames, flammable, oxidising or explosive substances
• Do not use near burners, fireplaces, pellet stoves, gas cookers and the like
• Do not introduce hot foods during operation
• Keep the door open only for the time necessary to access the contents: excessively
prolonged opening causes a significant increase in the internal temperature, with
important consequences on the state of preservation of the food
• Check the correct and complete closure of the door after each access; opening, even
partial, causes a rise in the internal temperature, deterioration and consequent waste of
food, as well as a rise in the internal temperature and unproductive use of electricity
• Use specific containers suitable for food contact to contain the food introduced. Do
not place food directly on shelves
• Use containers suitable for the nature of the food introduced: in case of insertion of
liquids or foods that could change their state (e.g. frozen foods), take into account the
possible liquefaction of the food material
• Do not introduce frozen food unless it is expected to be consumed in the short term:
the appliance does not ensure the tightness of the cold chain
• Make sure to connect the appliance to a standardized system built according to state-
of-the-art criteria, equipped with a differential switch and magneto-thermal switch
• Do not connect the appliance to devices that could cause it to start without
supervision, such as timers, remote controls or automations
• Once removed from the packaging, do not leave the relative materials unattended,
especially the plastic bags, as they could be dangerous for children or people with
reduced physical or cognitive abilities