Publicidad
Idiomas disponibles
Idiomas disponibles
en-us Basic settings
8.2 Operating tips
Once you have switched on the appliance, the set
¡
temperature is only reached after several hours.
Do not put any food in the appliance until the set
temperature has been reached.
The front and side panels of the housing heat up
¡
occasionally. This prevents condensation from forming.
When you close the door, a vacuum may be created.
¡
The door is then difficult to open again. Wait a moment
until the vacuum is offset.
The temperature in the appliance varies due to the
¡
following conditions:
– How often the appliance is opened
– Load capacity
– Temperature of newly stored food
– Ambient temperature
– Direct sunlight
8.3 Switching off the appliance
Switch off the appliance at the main switch.
▶
→ "Appliance", Fig.
1
8.4 Setting the temperature
Setting the refrigerator compartment temperature
Touch the temperature display (refrigerator
1.
compartment).
Touch
/
repeatedly until the temperature
2.
display (refrigerator compartment) shows the required
temperature setting.
Tip: When you press and hold
temperature changes by 1° per second until you
release it.
The recommended temperature in the refrigerator
compartment is 37 °F (3 °C).
Setting the recommended refrigerator compartment
temperature
Touch the temperature display (refrigerator
1.
compartment).
Touch "Set to Default" .
2.
The refrigerator compartment temperature is set to
a
37 °F (3 °C).
Setting the freezer compartment temperature
Touch the temperature display (freezer compartment).
1.
Touch
/
repeatedly until the temperature
2.
display (freezer compartment) shows the required
temperature setting.
Tip: When you press and hold
temperature changes by 1° per second until you
release it.
The recommended temperature in the freezer
compartment is 0 °F (−18 °C).
14
, Page 10
/
13
/
, the
/
, the
Setting the recommended freezer compartment
temperature
Touch the temperature display (freezer compartment).
1.
Touch "Set to Default" .
2.
The freezer compartment temperature is set to 0 °F
a
(−18 °C).
8.5 Cool-fresh compartment storage setting
Tip: Further settings are available in the
Home Connect® app.
Setting the cool-fresh compartment storage setting
Touch the cool-fresh compartment storage setting and
1.
confirm using
.
Touch the storage setting that you require.
2.
8.6 Button lock (childproof lock)
The button lock prevents the appliance from being
operated accidentally or incorrectly while running.
Note: You can permanently activate or deactivate the
automatic button lock. → Page 15
Switching on the button lock
Press and hold
for 3 seconds.
▶
lights up.
a
Switching off the button lock
Press and hold
for 3 seconds.
▶
8.7 Storage setting in the variable-
temperature compartment
You can set the temperature of the variable-temperature
compartment using predefined storage settings.
Tip: Further settings are available in the
Home Connect® app.
Setting the variable-temperature compartment
Select one of the options:
1.
On the display, touch the storage setting in the
‒
variable-temperature compartment and confirm using
.
In the control panel (variable-temperature
‒
compartment), touch and hold
bar lights up fully.
Touch the storage setting that you require.
2.
9 Basic settings
Ba s i c s e t t i n gs
Ba s i c s e t t i n gs
9.1 Changing the basic settings
Swipe to "Settings".
1.
"General" lights up.
a
Touch and change the required basic setting.
2.
until the light
Publicidad
