Publicidad
Idiomas disponibles
Idiomas disponibles
XP MZ-33 /22 01ENG
09-05-2000 09:32
TIMER/ SLEEP
5 Press TIMER or PROGRAM again.
™ The clock digits for the minutes flash.
6 Turn VOLUME to set the minutes: clockwise for minutes
up; anti-clockwise for minutes down.
7 Press TIMER or PROGRAM to confirm the time.
– The timer is now set and activated.
Display shows N.
Activating and deactivating TIMER
Press either:
• on the remote control,
TIMER during playback or in standby mode.
• on the set,
PROGRAM in standby mode.
™ Display shows N if activated, and disappears if
deactivated.
Activating and deactivating SLEEP
The sleep timer enables the unit to switch off by itself after
a set period of time. The clock time needs to be set first
before the sleep timer can be used.
• During playback to select and activate your desired
sleep time, press SLEEP on the remote control once or
more.
™ Display shows SLEEP and one of the sleep time
options in sequence: 60, 45, 30, 15, SLEEP
OFF, 60...
• To deactivate, press SLEEP on the remote control once
or more until SLEEP OFF is shown, or press to
standby on the set or remote control.
™ SLEEP disappears from the display.
8
Pagina 8
MZ-33 / 22 page 8
CD PLAYER
MC 158 COMP
MC 158 COMP
ACT AUDIO
ACT AUDIO
IO
IO
IO
IO
SYST EM
SYST EM
IO
IO
II
II
CD
DBB
SHUFFLE
IO
IO
PROGRA M
II
II
IO
IO
II
II
IO
IO
II
II
IO
IO
IO
IO
I II
I II
Playing a CD
This CD player plays Audio Discs including CD-Recordables
and CD-Rewritables.
• CD-ROM, CD-I, CDV, VCD, DVD, MP3 or computer CDs,
however, are not possible.
1 Select CD source.
2 Press OPEN/CLOSE to open the CD tray.
™ OPEN is displayed when you open the CD
compartment.
3 Insert a CD with the printed side facing up and press
down on OPEN/CLOSE to close the CD tray.
™ READ is displayed as the CD player scans the
contents of a CD, and then the total number of tracks
and playing time are shown.
™ NO DISC is displayed if you have inserted no
disc.
™ DISC NOT READABLEscrolls across the
display if you insert a CD incorrectly or a non
finalised CD-R(W).
4 Press 2; to start playback.
™ Current track number and elapsed playing time of the
track are displayed during CD playback.
5 To interrupt playback press 2; . Press 2; again to
resume playback.
OPEN
OPEN
CLOSE
CLOSE
™ The display freezes and the elapsed playing time
flashes when playback is interrupted.
PRESET
PRESET
6 To stop CD playback, press 9.
TUNING
TUNING
Note: CD play will also stop when:
– the CD tray is opened;
– the CD has reached the end;
– you select another source: TAPE, CD R or AUX.
Selecting a different track
• Press ¡1 or 2™ on the set, (on the remote control
¡ or ™) once or repeatedly until the desired track
number appears in the display.
• If you have selected a track number shortly after loading
a CD or in the PAUSE position, you will need to press
2; to start playback.
Finding a passage within a track
1 Press and hold down on ¡1 or 2™ (on the remote
control 11 or 22 ).
– The CD is played at high speed and low volume.
2 When you recognize the passage you want,
release 11 or 22.
– Normal playback continues.
Note: During a CD programme or if SHUFFLE/ REPEAT acti-
ve, searching is only possible within the same track.
Publicidad
