Publicidad
MONITOR INSTRUCTION
Quick start
Simply start pedaling and way you go!
The value of time, distance and calories will start counting upwards.
Adjust the resistance level with the large dial control knob.
Operational Instructions
USING THE
METER
POWER ON
POWER OFF
MODE BUTTON
FUNCTIONS
SCAN
TIME
SPEED
DISTANCE
CALORIES
NOTE:
The meter will shut off automatically after four minutes of inactivity. All function values will be kept.
Push the MODE button and hold it down for three seconds to reset all functions to zero.
Batteries Installation:
Dismount the meter from the bike.
Open the battery door on the back of the meter.
The meter operates with 2pcs AA batteries.
Note:
Do not mix a new battery with an old battery.
Use the same type of battery. Do not mix an alkaline battery with another type of battery.
Rechargeable batteries are not recommended.
TROUBLE SHOOTING
If the display becomes illegible or only partial segments appear, please remove the batteries, wait
20 seconds and refit.
DESCRIPTION
●
Pedal movement or push the MODE button.
●
Automatic shut off after four minutes of inactivity.
●
Press to select display functions, include SCAN, TIME, SPEED, DISTANCE and
CALORIES.
●
Press and hold for three seconds to reset all functions to zero.
DESCRIPTION
●
Automatically scans each function to time, speed, distance, calories, and heart
rate in sequence with change every four seconds. Press and release the MODE
button until SCAN appears on the display.
●
Display the time for one second up to 99:59 minutes.
●
Display the current speed from zero to 999.9 KM per hour.
●
Display the distance from zero to 99.99 KM.
●
Display the calories consumption from zero to 999.9 kcal.
●
The calories readout is an estimate for an average user. It should be used only
as a comparison between workouts on this unit.
9
9
Publicidad
