Descargar Imprimir esta página

Black and Decker BDCDMT112 Manual De Instrucciones página 12

Unidad motriz aditamento de taladro de 12 v max*, 20 v max*
Ocultar thumbs Ver también para BDCDMT112:

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
• Unitwill not start.
• Battery pack will not charge.
• Unit shuts off abruptly.
TROUBLESHOOTING
Possible Cause
• Battery pack not installed properly.
• Battery pack not charged.
• Attachment is not secured.
• Battery pack not inserted into charger.
• Charger not plugged in.
• Surrounding air temperature
too hot or too cold.
• Battery pack has reached its
maximum thermal limit.
• Out of charge. ( To
maximize the life of the
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
Possible Solution
• Check battery pack installation.
• Check battery pack charging
requirements.
• Make certain the attachment is fully
pushed into the Power Unit.
• Insert battery pack into charger until
LED illuminates.
• Plug charger into a working outlet.
Refer to "important Charging Notes"
for more details.
• Move charger and battery pack to a
surrounding air temperature of above
40 degrees F (4,5°C) or below 105
degrees F (+40,5°C).
• Allow battery pack to cool down.
• Place on charger and
allow to charge.
For assistance with your product, visit our website www.blackanddecker.com
for the location
of the service center nearest you or call the BLACK & DECKER help line at 1=800=544=6986.
MAINTENANCE
Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the toot;
never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized service
centers or other qualified service personnel, always using identical replacement parts.
ACCESSORIES
z,_WARNING:
The use of any accessory not recommended for use with this tool could be hazardous.
Recommended accessories for use with your tool are available from your local dealer or authorized
service center. If you need assistance regarding accessories, please call: 1-800-544-6986.
The RBRC
TM
Seal
The RBRC
TM
(Rechargeable Battery Recycling Corporation) Seal on the lithium-ion
battery (or battery pack) indicates that the costs to recycle the battery (or battery pack)
at the end of its useful life have already been paid by Black & Decker. In some areas,
it is illegal to place spent lithium-ion batteries in the trash or municipal solid waste
stream and the RBRC program provides an environmentally conscious alternative.
RBRC in cooperation with Black & Decker and other battery users, has established programs
in the United States and Canada to facilitate the collection of spent lithium-ion batteries. Help
protect our environment and conserve natural resources by returning the tool to an authorized
Black & Decker service center for recycling. You may also contact your local recycling center for
information on where to drop off the spent battery, or call 1-800-8-BATTERY.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
12

Publicidad

loading

Este manual también es adecuado para:

Bdcdmt120