VITO Pro Power VIAS160 Manual De Instrucciones página 10

EN
as possible during the weld:remem
ber that the inclination of the
electrode to the advancement must
be 20-30C.
WARNING!
Always use pliers to remove
consumed electrodes or to move
welded pieces
make sure that after welding
operation the electrode holder is
reset unplugged.
10
DECLARATION
OF CONFORMITY
We declare under our exclusive
responsibility, that the product
welding machine, with code
VIAS160, meets the following
standards or standardization
documents:
EN 60974-1:2012, EN
50445:2008, AfPS GS 2014:01,
according to the determinations of
the directives:
2014/35/EU - Low Voltage
Directive.
S. João de Ver,
6th of April of 2022.
Central Lobão S. A.
Responsible for the Technical File
WARRANTY TERMS
The warranty for this product is in
accordance with the law in force
from the date of purchase. You
should, therefore, keep your proof
of purchase during this period. The
warranty covers any manufacturing
defect in material or operation, as
well as parts and work needed for
their repairing.
Excluded from the warranty are
the misuse of the product, any
repairs carried out by unauthorized
individuals (outside the service
center of the brand VITO) as well as
any damage caused by its use.