Video and RSE harness
These two additional harnesses are to be used in GMLAN29 systems only.
(1) Backup camera harness:
• Connect the Yellow RCA to the aftermarket radios backup camera video input.
(2) RSE harness:
• Connect the "From rear A/V input" RCA to the aftermarket radios audio/video input.
Plug Yellow in to video in, Red to right audio in, and White to left audio in.
• Connect the "To overhead screen" RCA to the aftermarket radios audio/video output.
Plug Yellow in to video out, Red to right audio out, and White to left audio out.
• Connect the Black wire with the ring terminal to ground.
• To listen to the factory satellite, change the source of the radio to AUX.
• Press and hold the "Source" button for three seconds.
• The driver's information center, located in the center of your instrument cluster, will
now display your satellite information.
• To exit Satellite mode press and hold "Source" for (3) seconds.
Listed below are the functions of the steering wheel controls:
Source - Changes source of the radio/enters and exits Satellite mode
Track up - Changes track on radio/satellite station
Track down - Changes track on radio/satellite station
Volume up - Enter
Continued onto Sections 4 and 5
Section 1: GM LAN 29
OE Satellite
1.4
(if equipped)