Publicidad
Idiomas disponibles
Idiomas disponibles
Manual Operation (Without Remote Control)
In the event that the remote control fails to
work, your unit can be operated manually
using the MANUAL CONTROL button located
on the indoor unit.
Note that manual operation is not a long-
term solution, and that operating the unit
with your remote control is strongly recom-
mended.
BEFORE MANUAL OPERATION
Unit must be turned off before manual op-
eration.
To manually operate the unit:
1. Open the front panel of the indoor unit.
2. Locate the MANUAL CONTROL button on
the right-hand side of the unit.
3. Press the MANUAL CONTROL button once
to activate FORCED AUTOMATIC mode.
4. Press the MANUAL CONTROL again to acti-
vate FORCED COOLING mode.
5. Press the MANUAL CONTROL button a third
time to turn the unit off.
Care and Maintenance
Cleaning The Indoor Unit
WARNING: BEFORE PERFORM-
ING CLEANING OR MAINTE-
NANCE JOBS, ALWAYS TURN
OFF YOUR AIR CONDITIONER
SYSTEM AND DISCONNECT IT
FROM THE POWER SUPPLY.
6. Close the front panel.
Manual control button
CAUTION: The MANUAL CONTROL button is
intended for testing purposes and emer-
gency operation only.
Please do not use this function unless the re-
mote control is lost and it is absolutely nec-
essary. To restore regular operation, use the
remote control to activate the unit.
Use only a soft, dry cloth to wipe the unit
clean. If the unit is especially dirty, you can
use a cloth soaked in warm water to wipe it
clean.
• Do not use chemicals or chemically treated
cloths to clean the unit.
• Do not use benzene, thinner, polishing pow-
ders or other solvents to clean the unit.
They can cause the plastic surface to crack
or deform.
• Do not use water hotter than 40 °C (104 °F)
to clean the front panel. This can cause the
panel to deform or become discolored.
73
Publicidad
