GE MGI09CABC3 Manual De Uso Y Cuidado página 86

Cooling, Heating (on some models) and Fan modes
Make sure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL,
HEAT (cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the de-
sired temperature. The temperature can
be set within the range of 17 °C - 30 °C in 1
°C segments.
3. Press the FAN button to select any of the
fan speed levels AUTO, LOW, MED, or HIGH.
4. Press the ON/OFF button to start the air
conditioner.
NOTE: In the FAN mode, the setting tempera-
ture will not be displayed in the remote con-
trol and you are not able to control the room
temperature either. In this case, only steps 1,
3 and 4 may be performed.
Dehumidify
Make sure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flash-
ing.
1. Press the MODE button to select the DRY
mode.
2. Press the UP/DOWN buttons to set the de-
sired temperature. The temperature can
be set within the range of 17 °C - 30 °C in
1 °C segments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE In the Dehumidifying (DRY) mode, you
can not modify the fan speed. It is automati-
cally controlled by the system.
86
4
1
3
3
1
2
2