Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications
|
Power Supply
: 12 V DC (11 V - 16 V) Test Voltage 14.4 V, Negative ground
Maximum Power Output
: 40 W x 4 channels at 400 Hz, Volume Control maximum
Tone Action
: Bass ; + 12 dB at 100 Hz
.
:
Treble; + 12 dB at 10 kHz
Current Consumption
: Less than 2 A (tape mode, 0.5 W 4-speaker)
Pre-Amp Output Voltage
: 2.0V (CD Play mode; 1kHz 0 dB)
Speaker Impedance
: 4 Q (4 - 8 Q acceptable)
Dimensions (W x H x D)
: 7" x 1-15/16" x 5-7/8" (178 x 50 x 150 mm)
Weight
: 3 lbs. 8 oz. (1.6 kg)
Frequency Range
: 530 - 1,710 kHz
Useable Sensitivity
: 28 dB/uV (25 uV/ S/N 20 dB)
Frequency Range
: 87.9 - 107.9 MHz
Usable Sensitivity
: 13.2 dBf. (1.25 pV/ 75 Q)
50 dB Quieting Sensitivity
: 15.2 dBf. (1.6 pV/ 75 Q)
Frequency Response
: 30 - 15,000 Hz +3 dB
Capture Ratio
: 1.5 dB
Alternate Channel Selectivity
: 75 dB
Stereo Separation
: 35 dB at 1,000Hz
Image Response Ratio
: 65 dB
IF Response Ratio
: 100 dB
Signal/Noise Ratio
° :70 dB
[tape PLAYER
]
Reproduction System
: 4-track, 2-program stereo
|
;
Tape Speed
: 1-7/8"/sec (4.76 cm/sec)
FF/REW Time
: Less than 110 sec (C-60)
Frequency Response
: 35 - 14,000 Hz +3 dB (normal)
35 - 17,000 Hz +3 dB (metal)
Wow and Flutter
: 0.12 % (WRMS)
Signal/Noise Ratio
: 52 dB (Dolby B NR on;62dB)
*Above specifications comply with EIA standards.
Note:
Specifications and design are subject to modification without notice due to improvements in technology.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol OÙ are trademarks of Dolby Laboratories Licensing Corporation.
Part 15 of the FCC Rules isstanaristorus.a on
This unit has been manufactured under the part 15 of the FCC Rules.
Do not attempt to make any changes or modifications to this unit.
CQ-R255SEUC
31
Publicidad
