Publicidad
Idiomas disponibles
Idiomas disponibles
Heater fixed at 25 °C for small aquaria up to max. 120 l
The mini heater is equipped with a durable plastic housing and is suitable for small aquaria with a maximum
water volume of 120 l. The mini heater can be flexibly positioned using the bracket supplied. Intelligent
electronics keep the water in the aquarium at the set temperature of approx. 25 °C. A clearly visible LED status
display provides reliable information about the operating status. The shatterproof and waterproof plastic housing
not only gives the mini heater a stylish design, but also ensures maximum safety in the aquarium. The mini
heater is equipped with overheating and dry-running protection.
1. Safety hints
Do not touch the power plug with wet hands.
Before carrying out maintenance work on the heater or the aquarium, disconnect the mains plug and
switch off all consumers on the aquarium.
For indoor use only.
-
Power supply 220 – 230 V ~, 50 Hz.
-
The
power
cable
scrapped.
-
The unit may only be operated within the water. It must be completely immersed in the water. Operation
outside the water can cause burns.
-
The maximum immersion depth is 100 cm.
-
Operating range: -1 °C to +45 °C.
-
The built-in dry-running protection must not be used permanently. It only serves to protect the heater from
damage if you forget to switch it off during a water change. Too frequent use of the dry run protection will
cause the heater to fail.
For aquaria up to
(at room temperature of at least 21 °C)
Voltage
Power consumption app.
Cable length app.
Temperature accuracy
Dimensions (l x w x h) app.
(without holder)
3. Operation
Fig. 1:
1. Heating indicator (red), temperature reached (green)
2. Sucker
After unpacking, the unit has to be checked for damages.
Operation Manual ENG
cannot
be
replaced.
If
the
cable
is
damaged,
25 W
40 l
220 - 230 V / 50 Hz
25 W
50 x 25 x 90
50 x 25 x 120
mm
the
unit
should
50 W
75 W
75 l
120 l
50 W
75 W
1,400 mm
+/- 1 °C
50 x 25 x 120
mm
mm
be
4
Publicidad
